Crestron TPS-G-TPI Operation Manual page 48

G-Series Touchpanel Interface
®
44 ¥ Isys G-Series Touchpanel Interface: TPS-G-TPI
2. Open Crestron Toolbox.
3. Click the Address Book icon
Book to open the Address Book. The Address Book allows you to maintain
a list of accessible control systems and network devices. You can establish a
session with any or all of the devices in the address book (provided the PC
has a valid connection to each Cresnet or Ethernet network).
4. Select the device from the Address Book or click Add Entry and type a
name for the new device, such as Interface Direct.
5. Select RS232 as the Connection Type and select the serial settings of the
device. This sets the PC to the same serial settings. Enter the settings and
click OK.
For the interface, the default settings are:
•
Port = COM 1
•
Baud Rate = 152000 (or select Auto-Detect)
•
Parity = None
•
Data Bits = 8
•
Stop Bits = 1
•
Hardware Handshaking (RTS/CTS) = Off
•
Software Handshaking (XON/XOFF) = Off
Crestron Toolbox Address Book Setup
6. Select Tools | System Info or click the System Info icon
from the drop down list at the bottom of the window if it is not already
selected. If communication is successful, the "System Info" window
displays the operating system, Cresnet ID, connection parameters, memory
usage, and hardware information.
®
Crestron Isys TPS-G-TPI
, or select Tools | Manage Address
. Select Direct
Operations Guide – DOC. 6445