Crestron TPS-G-TPI Operation Manual page 23

®
Crestron Isys TPS-G-TPI
Operations Guide – DOC. 6445
QM Setup Menu
To open the QM SETUP MENU, press the QM button from the SETUP MENU.
The QM SETUP MENU offers controls for detecting QM Audio Input, Transmitter
ID, QM Setup channels and video type for each QM Setup channel.
After these parameters have been set, select the Return button to return to the
SETUP MENU.
QM SETUP
Refer to the following table for additional QM SETUP MENU details.
QM Setup Details
QM SETUP
SCREEN
CONTROLS
QM Audio 1 Detects the presence of QM Audio on channel 1 when selected.
QM Audio 2 Detects the presence of QM Audio on channel 2 when selected.
QM Transmitter ID Displays the ID of the QM transmitter in the range of 03 to FE.
Setup QM 1 Displays the QM 1 SETUP MENU. By default, the QM 1 SETUP
MENU displays video controls: Peak, Boost, Skew Red, Skew
Green and Skew Blue, in the lower right quadrant of the menu.
Video Pressing this before pressing the Setup QM 1 button will open the
QM 1 SETUP MENU in Video mode.
S-Video Pressing this before pressing the Setup QM 1 button will open the
QM 1 SETUP MENU in S-Video mode.
Component Pressing this before pressing the Setup QM 1 button will open the
QM 1 SETUP MENU in Component mode.
RGB Pressing this before pressing the Setup QM 1 button will open the
QM 1 SETUP MENU in RGB mode.
Continued on the following page
G-Series Touchpanel Interface
DESCRIPTION
®
G-Series Touchpanel Interface: TPS-G-TPI ¥ 19
Isys