Specifications - Crestron TPS-G-TPI Operation Manual

®
Crestron Isys TPS-G-TPI
Operations Guide – DOC. 6445
Memory
The TPS-G-TPI features 128 MB DDR RAM and 64 MB Flash, which is expandable
to 192 MB via compact flash.
Sound
Audio capabilities include a stereo headphone/line level out, built-in volume control
and audio mixer, and built-in wave (WAV) sound file capability. Sound can be
generated by the TPS-G-TPI by using downloaded WAV files or can be mixed in
from two external QuickMedia inputs. Sound from the Quick Media inputs along
with WAV and Keyclick is sent to the stereo headphone and QuickMedia output.
Mic input received at the QuickMedia inputs is sent to only the QuickMedia output.
Video
The TPS-G-TPI can simultaneously display two fully-scalable, full-motion video
windows, each supporting standard video, HDTV, and high-resolution RGB signals
from external AV and computer sources. The TPS-G-TPI uses auto-detect for
composite, S-video, component or RGBHV. It supports SDTV (NTSC and PAL),
EDTV, HDTV and RGB (VGA) up to UXGA (1600 x 1200). Two QM inputs
provide for connectivity to QuickMedia allowing graphics and video to be passed
through for output via the QM OUT port or VGA connector and QM sound via the
stereo headphone jack.
QuickMedia™
The TPS-G-TPI acts as both a QuickMedia (QM) receiver and transmitter. Its two
QM input ports support both video and audio as described earlier and the QM Output
port supports simultaneous video output to feed an additional remote display device.
QM out also supports WAV audio, but not audio from the QM inputs. The TPS-G-
TPI interfaces directly with other QM-based products via CresCAT-QM cable.
Connectivity
The TPS-G-TPI interfaces feature a Cresnet
seamless communication with Crestron control systems, and computers. In addition,
two USB ports are provided for future applications. The bidirectional RS-232 port is
provided for computer console, mouse or "Touch-The-PC" support.

Specifications

The following table provides a summary of specifications for the TPS-G-TPI.
TPS-G-TPI Specifications
SPECIFICATION
®
Cresnet Power Usage 45 Watts (1.88 Amps @ 24 Volts DC)
Default Net ID 03
Signal Join Maximums 4000 Digital, 4000 Analog, 999 Serial
Control System Update
1, 2, 3
Files
2-Series Control System Version 3.137.CUZ or later
Interface Firmware
tps-g-tpi_1.002.00021.csf
Memory
128 MB DDR RAM, 64 MB Flash
Continued on the following page
G-Series Touchpanel Interface
®
and a high-speed Ethernet port for
DETAILS
®
Isys G-Series Touchpanel Interface: TPS-G-TPI ¥
3