Crestron TPS-G-TPI Operation Manual page 29

®
Crestron Isys TPS-G-TPI
Operations Guide – DOC. 6445
QM Audio Output Setup Menu
To open the QM AUDIO OUTPUT SETUP MENU, press the QM Output button
on the GENERAL AUDIO SETUP MENU. The QM AUDIO OUTPUT SETUP
MENU offers a series of buttons that adjust the program gain, QM Transmit ID and
speech EQ.
The Restore Default Output Settings button returns all audio parameters on this
menu to their default settings. Program Gain buttons and Transmit QM ID Manual
and Auto buttons are provided to adjust QM audio output. After these parameters
have been set, select the Return button to return to the SETUP MENU.
QM AUDIO OUTPUT SETUP MENU
Refer to the following table for additional QM AUDIO OUTPUT SETUP MENU
details.
QM Audio Output Setup Details
QM AUDIO
OUTPUT SETUP
MENU
CONTROLS
Restore Default Returns the settings on this menu to their factory defaults.
Output Settings
Program Gain This controls the volume of the QM Program audio sent to the
QM output.
Transmit QM ID This determines the QM ID transmitted to the next device in the
installation.
Manual Enables the Down and Up buttons to manually set the
transmitted QM ID.
Auto Sets the QM ID to the devices Cresnet ID
G-Series Touchpanel Interface
DESCRIPTION
®
G-Series Touchpanel Interface: TPS-G-TPI ¥ 25
Isys