Crestron TPS-G-TPI Operation Manual page 49

®
Crestron Isys TPS-G-TPI
Operations Guide – DOC. 6445
Toolbox – System Info
The Functions menu may now be used to upload a project, update firmware,
and reset the network ID.
Toolbox Functions Menu – Specific to TPS-G-TPI
NOTE: The list of functions depends on the type of device.
TCP/IP Communication
This section explains how to configure a TPS-G-TPI to communicate over Ethernet
using TCP/IP. These procedures assume that the interface has been powered up and
connected properly.
PC-to-interface communications can be implemented over TCP/IP as shown in the
following diagram. TCP/IP is the fastest method of communicating between the PC
and the interface.
G-Series Touchpanel Interface
®
G-Series Touchpanel Interface: TPS-G-TPI ¥ 45
Isys