Crestron TPS-G-TPI Operation Manual page 22

G-Series Touchpanel Interface
®
18 ¥ Isys G-Series Touchpanel Interface: TPS-G-TPI
RS-232 Menu
The TPS-G-TPI interface allows for one of four RS-232 communication modes:
Console (i.e., loading TPS-G-TPI interface projects and firmware)
•
Touch Output (communication of touch coordinates to an external device)
•
Mouse Input (allows a mouse to control the interface)
•
External Touch Input (allows another device to control the interface).
•
For convenience, the RS-232 MENU Consol Port Mode also permits the selection of
the RS-232 communication options, RTS On/Off, XON-XOFF On/Off, Baud Rate,
Data Bits, Parity, and Stop Bits.
Touch the communication option to select communication parameters and then select
Save and Return to save the RS-232 settings and return to the SETUP MENU.
Default settings: Console mode, Baud rate: 115200, data bits: 8 bit, parity: none, stop
bit: 1, XON/XOFF off, RTS off.
RS-232 MENU
®
Crestron Isys TPS-G-TPI
Operations Guide – DOC. 6445