Crestron TPS-G-TPI Operation Manual page 32

G-Series Touchpanel Interface
®
28 ¥ Isys G-Series Touchpanel Interface: TPS-G-TPI
The video menu for RGB controls consists
Position submenus. Touching the RGB Color button enables controls for
Brightness, Contrast, Red, Green, and Blue. Touching the RGB Size & Position
button enables Position, Size and Phase controls.
VIDEO 1 SETUP RGB (Size and position shown)
Refer to the following table for additional VIDEO 1 SETUP details.
Video Setup Details – Video, S-Video, Component and RGB
VIDEO SCREEN
CONTROLS
QM Signal Field indicates the presence of a QM signal.
Video Preset Displays the current Video Preset number. Saved presets can also
be called up using this control.
Load Preset Will load the selected Video Preset.
Store Preset Will store any changes you've made to the Video setup at the
displayed preset number.
Restore Default Restores the color settings to their original defaults.
Color Settings
Color Control When Video, S-Video or Component is selected as the video type,
these controls are available. The Restore Default Color Settings
button places the controls at midpoint.
1, 2
Adjusts video image brightness in the signal.
Brightness
1, 2
Adjusts video image contrast in the signal.
Contrast
3
The saturation, or intensity of color in the video image can be
Saturation
adjusted with the plus and minus buttons.
3
The hue, or tint of the video image is adjusted with the plus and
Hue
minus buttons.
1, 2
Adjusts the amount of red in the video signal. Available when the
Red
RGB Color button is selected.
1, 2
Adjusts the amount of green in the video signal. Available when the
Green
RGB Color button is selected.
1, 2
Adjusts the amount of blue in the video signal. Available when the
Blue
RGB Color button is selected.
®
Crestron Isys
of Preset Controls and Color and Size &
DESCRIPTION
Operations Guide – DOC. 6445
TPS-G-TPI