Crestron TPS-G-TPI Operation Manual page 46

G-Series Touchpanel Interface
®
42 ¥ Isys G-Series Touchpanel Interface: TPS-G-TPI
"Address Book" Window – Serial Setup
3. After setting the correct parameters, click OK to return to the Crestron
Toolbox main window.
4. Click Tools | Network Device Tree, or click the network device tree icon
to display the devices in the system. Communications are confirmed
when the network devices are displayed.
Network Device Tree
To view a specific device, expand the network device tree by clicking +.
Expand the network device tree till the device to be managed is selected.
Right-click the desired Net ID to open the sub-menu. This menu provides a
wide range of functions, including; change the Net ID, open text console,
upload project, update firmware, etc.
®
Crestron Isys TPS-G-TPI
Operations Guide – DOC. 6445