Crestron TPS-G-TPI Operation Manual page 55

®
Crestron Isys TPS-G-TPI
Operations Guide – DOC. 6445
Crestron Toolbox – Tools | System Info
4. Click on the Address Book icon and select the desired connection to the
control system and click OK. The "System Info" window will update to
display the connection information and the Functions menu is populated.
5. Select Functions | SIMPL Program.
The "SIMPL Program" window contains information about the currently
loaded SIMPL program (if any), and permits you to stop, start, erase,
retrieve, and upload a SIMPL program. This menu also permits you to
upload to compact flash or internal flash.
CAUTION: Verify that any compact flash used either contains no files or
only contains files you want loaded to the interface prior to inserting into
the interface. When unknown files reside on the compact flash, existing
files on the interface may be overridden or erased if the interface reboots.
NOTE: The current suggested maximum project size is 170MB or less.
Projects larger than this may load without error, but may not display
correctly.
"SIMPL Program" Window
Isys
G-Series Touchpanel Interface
®
G-Series Touchpanel Interface: TPS-G-TPI ¥ 51