Crestron TPS-XVGAL Operating & Installation Manual
Crestron TPS-XVGAL Operating & Installation Manual

Crestron TPS-XVGAL Operating & Installation Manual

Rgb computer interface card for tps/lectern panel

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for Crestron TPS-XVGAL

  • Page 2 This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON...
  • Page 3: Table Of Contents

    Serial Mouse Control Driver Telestrator Video Annotation Device Return and Warranty Policies Merchandise Returns / Repair Service CRESTRON Limited Warranty Operations & Installation Guide - DOC. 5945 ™ ® Windows Programming RGB Computer Interface Card for TPS/Lectern Panel: TPS-XVGAL • i...
  • Page 5: Rgb Computer Interface Card For Tps/Lectern Panel: Tps-Xvgal

    “Appendix: Optional TPS User Interface Setups” that begins on page 13. Physical Description The TPS-XVGAL, shown on the next page, is a printed circuit board (PCB) designed to be installed into a specific expansion slot in the TPS user interface. The card contains a 60-pin connector that attaches directly to the motherboard of the interface and the card is secured with four attached knurled mounting screws.
  • Page 6: Leading Specifications

    TPS-XVGAL. Dimensions and weight are rounded to the nearest hundredth unit. Leading Specifications of the TPS-XVGAL SPECIFICATION Power Requirements SIMPL™ Windows® 2 • RGB Computer Interface Card for TPS/Lectern Panel: TPS-XVGAL COMPUTER VIDEO INPUT 6.99 in (17.75 cm) FAN ELECTRICAL CONNECTOR 10 Watts (0.417 Amps @ 24VDC)
  • Page 7 Crestron. Update files with an “S” designator are for the ST-CP, “V” designator for CEN/CN-TVAV, “W” for CNRACKX/-DP, and “X” for CNMSX-AV/Pro control systems.
  • Page 8: Computer Video Connector Signals

    This connector is not used if composite sync is utilized. Installation and Hookup The TPS-XVGAL is designed to be installed into a specific expansion slot in the TPS user interface. The tools required for installation are a #1 Phillips screwdriver and a grounding strap (or grounded workstation).
  • Page 9 Align the connectors carefully to prevent damage to the card(s), cover, or TPS user interface. Operations & Installation Guide - DOC. 5945 RGB Computer Interface Card for TPS/Lectern Panel: TPS-XVGAL • 5...
  • Page 10 The screws and plate may be discarded. Installation Diagram 3 of 7 - Remove Blank Plate 6 • RGB Computer Interface Card for TPS/Lectern Panel: TPS-XVGAL Operations & Installation Guide - DOC. 5945...
  • Page 11 PCB connector of the TPS-XVGAL. CAUTION: The TPS-XVGAL video input connectors may have to be aligned slightly to fit through the openings in the rear cover. Align the connectors of this card (or any other optional card that is installed) carefully to prevent damage to the card, cover, or TPS user interface.
  • Page 12 #1 Phillips screwdriver, tighten the mounting screws an additional 1/8-turn to secure cover. Installation Diagram 6 of 7 - Install Rear Cover Screws 8 • RGB Computer Interface Card for TPS/Lectern Panel: TPS-XVGAL Operations & Installation Guide - DOC. 5945...
  • Page 13 Guides can be obtained from the Products page (PRODUCT MANUALS section) or Downloads page (MANUAL Library) of Crestron’s website (www.crestron.com). New users are required to register in order to obtain access to the FTP site. RGB Computer Interface Card for TPS/Lectern Panel: TPS-XVGAL • 9...
  • Page 14: Tps User Interface Setup

    (www.crestron.com). VT Pro-e Setup In order for the RGB video to be displayed, the TPS-XVGAL must be installed into the proper expansion slot of the TPS user interfaces and a RGB window object must reside on a page within the uploaded VT Pro-e project.
  • Page 15: Problem Solving

    If serial mouse control driver is installed, features of monitor touch the touchscreen to deactivate the in PC are activated. energy saving features. In the display properties of the PC, deselect the monitor energy saving features. RGB Computer Interface Card for TPS/Lectern Panel: TPS-XVGAL • 11...
  • Page 16: Further Inquiries

    Download | Product Manuals section and are identified as an “Addendum” in the Download column. Future Firmware Upgrades To take advantage of all the TPS-XVGAL features, it is important that the touchpanel contains the latest firmware available. Therefore, please check the (http://www.crestron.com/downloads/software_updates.asp) for the latest version of firmware.
  • Page 17: Appendix: Optional Tps User Interface Setups

    Crestron TPS-XVGAL RGB Computer Interface Card for TPS/Lectern Panel Appendix: Optional TPS User Interface Setups Optional TPS user interface setups that utilize the TPS-XVGAL include serial mouse control driver software and instructions to integrate a Boeckeler Pointmaker® Video Marker telestrator with the TPS user interface and Cresnet system.
  • Page 18: Telestrator Video Annotation Device

    RGB Computer Interface Card for TPS/Lectern Panel Crestron TPS-XVGAL Telestrator Video Annotation Device TPS user interfaces equipped with TPS-XVGAL expansion cards can be integrated with the Boeckeler Pointmaker® Video Marker (model PVI-83) telestrator, a video annotation device by Boeckeler Instruments (www.pointmaker.com).
  • Page 19: Return And Warranty Policies

    CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures.
  • Page 20 Crestron Electronics, Inc. Operations & Installation Guide - DOC. 5945 15 Volvo Drive Rockleigh, NJ 07647 08.01 Tel: 888.CRESTRON Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.

Table of Contents