Floor Plan Upload; Upload A Project - Crestron 1 Beyond Automate VX Series Product Manual

Floor Plan Upload

Room Designer by default comes with a demo layout tied to Configuration 1. This is only a template and
should not be used as an actual room layout.
To upload a floor plan for a room design:
1. Select the Choose File button under the Floor Plan Upload banner. This will open a file explorer
window.
Floor Plan Upload
2. In the file explorer window, navigate to the desired floor plan and select it (.png and .jpeg files are
supported).
The selected floor plan will then be displayed on the Room Designer page.

Upload a Project

Alternatively, if a project has been created already, it can be uploaded to the system. The most common
application of this is when a project is created on the
to the Automate VX.
33 • IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B
Room Designer Website and needs to be uploaded
Product Manual — Doc. 9324F