Crestron TPS-G-TPI Operation Manual page 27

®
Crestron Isys TPS-G-TPI
Operations Guide – DOC. 6445
General Audio Setup Details
GENERAL
AUDIO SETUP
MENU
CONTROLS
QM Inputs Displays the QM Audio Input Setup menu.
QM Output Displays the QM Audio Output Setup menu.
Play Test WAV File Plays a short WAV audio file.
Restore Default Returns the settings on this menu to their factory defaults.
Audio Settings
Master Volume The headphone volume of all audio types (QM Program and Mic
Input, WAV, and key click) is affected by the Master Volume
control. If the Master Volume control is set to 100%, the volume
for any type of audio is at maximum. If the Master Volume is set
to 0%, the value of all audio types is overridden and the interface
is silent. If Master Volume is a percentage (say 50%), then all
audio types can only achieve half their value.
Key Click Adjusts the level of the key click sound with the plus and minus
buttons.
WAV Volume Adjusts the volume of the WAV file with the plus and minus
buttons. Click Play Test WAV File button to sample and adjust
the volume as a pre-loaded WAV file plays.
Bass Adjusts the overall bass output with the plus and minus buttons.
Treble Adjusts the overall treble output with the plus and minus buttons.
G-Series Touchpanel Interface
DESCRIPTION
®
G-Series Touchpanel Interface: TPS-G-TPI ¥ 23
Isys