Assembling The Valve Cover - APRILIA RSV mille 956X Service And Repair Manual

RSV mille

3.7.19 ASSEMBLING THE VALVE COVER

Carefully read 0.2.1 (PRECAUTIONS AND GENERAL
INFORMATIONS).
Coat the cable (1) of the camshaft sensor and rubber
element (2) with SILASTIC 732 RTV.
Grease the head cover gasket (3) and insert it in the
groove on the head cover (4).
Place the head cover on head "1" (front) and on head
"2" (rear), securing it with the five M6 spacer screws
(5).
Driving torque of screws (5): 9 Nm (0.9 kgm).
Secure the intake flange (6) with the two M8 T.C.E.I.
screws (7) and respective washers.
Driving torque of screws (7): 19 Nm (1.9 kgm).
Secure the support bracket (8) with the two M10
T.C.E.I. screws (9), fasten the two M10 nuts and apply
®
LOCTITE 243.
Driving torque of screws (9): 40 Nm (4.0 kgm).
®
B = LOCTITE 243.
Q = SILASTIC 732 RTV.
ENGINE
3 - 111