Changing The Dashboard Bulbs/Lights - APRILIA RSV mille 956X Service And Repair Manual

ELECTRICAL SYSTEM
6.12.4 CHANGING THE DASHBOARD BULBS /
LIGHTS
NOTE
Before replacing a bulb/light, check the fuses,
see 6.15 (CHANGING THE FUSES).
To change the bulb/light:
Remove the dashboard, see 7.1.23 (REMOVING THE
DASHBOARD).
Unscrew and remove the eight fastening screws (1).
Remove the rear cover (2).
Slide out the relevant bulb holder and, where neces-
sary, replace the bulb:
Pos. Description
3 Bulbs for right-hand display lighting
4 Bulbs for left-hand display lighting
5 Bulbs for rev counter lighting
Pos. Warning
light
\
6
g
7
a
8
c
9
q
10
a
CAUTION
If the defect persists even after the bulb/light has
been changed, check the relevant sensor/switch,
see:
– 6.6.4 (CHECKING THE SIDE STAND AND THE SAFE-
TY SWITCH);
– 6.10.2 (LOW FUEL WARNING LIGHT);
– 6.10.4 (CHECKING THE ENGINE OIL LOW PRES-
SURE SENSOR).
NOTE
The two LEDs (11) and (12) cannot be removed.
Pos. LED
j
11
12 max
6 - 34
Description
Side stand down
Low fuel
High beam
Direction indicator
Neutral
Description
Engine oil pressure
Red line
RSV mille