Removing The Saddle Support Cover; Removing The Rear Turn Indicators - APRILIA RS 50 Workshop Manual

Cycle Parts
REMOVING THE SADDLE SUPPORT
COVER
Read through the section PRECAUTIONS AND
GENERAL INFORMATION.
Remove the rider saddle (REMOVING THE RIDER
SADDLE).
Lift the fuel tank (LIFTING THE FUEL TANK).
Loosen and remove the four screws (1).
WARNING
When handling plastic and painted parts, take
care not to score or damage them.
Remove saddle support cover (2).
Use the same procedure for the saddle support cover
on the right side.
REMOVING THE REAR TURN INDICA-
TORS
Read through the section PRECAUTIONS AND
GENERAL INFORMATION.
Remove the rear fairing (REMOVING THE REAR
FAIRING).
Detach electrical connections (3).
WARNING
When refitting, ensure that electrical connector (3)
is properly reattached.
Loosen and remove screws (4).
Collect nuts (5).
Remove turn indicators (6).
WARNING
When removing turn indicator (6), help the electri-
cal wire with the related connector through the
slot in the saddle support lower panel and the
number-plate holder.
chap. 7
1
4
6
5
Release 00 2000-11
RS 50
1
2
7
3
4
6
5
7-23