APRILIA RSV mille 956X Service And Repair Manual page 126

RSV mille
ASSEMBLY
Clean the diameter of the main bush housing inside the
engine casing.
Determine the main bush size group based on the col-
oured markings (10) on the engine casing.
a
CAUTION
The lower main bush (11) of the driving shaft, fly-
wheel side, features a lubrication hole.
NOTE
The size group of the main bushes is also
marked with a coloured dot.
If the coloured marking applied on the engine casing is
no longer clearly legible, calculate the diameter based
on the average of a number of different measurements.
a
CAUTION
Take a number of measurements, especially in the di-
rection of the axis of both cylinders.
Driving shaft
Hole in the Main bushes
engine casing
Ø49.899 - Ø49.908
mm
Ø49.908 - Ø49.918
mm
Ø49.918 - Ø49.929
mm
Countershaft
Hole in the Main bushes
engine casing
Ø35.909 - Ø35.918
mm
Ø35.918 - Ø35.928
mm
Ø35.928 - Ø35.939
mm
®
M = MOLYKOTE G-N.
Engine casing
marking marking
red red
blue blue
yellow yellow
Engine casing
marking marking
red red
blue blue
yellow yellow
ENGINE
3 - 43