Oil Pump And Oil Pump Drive Assembly - APRILIA RSV mille 956X Service And Repair Manual

RSV mille

3.6.10 OIL PUMP AND OIL PUMP DRIVE ASSEMBLY

Carefully read 0.2.1 (PRECAUTIONS AND GENERAL
INFORMATIONS).
a
CAUTION
The oil pump gears, both driving (1) and driven (2),
must always be replaced once they have been disas-
sembled.
NOTE
The oil pump drive gear (1) is attached to the
support plate of the complete clutch housing.
TAKING THE OIL PUMP APART
Remove the suction pumps internal rotor (3) from the
oil pump shaft.
Remove the pin (4).
Slip off the oil pump lid (5) and pin (6).
Remove the pressure pumps external rotor (7).
Remove the oil pump shaft (8) from the pressure pump
casing (9).
Remove the pressure pumps internal rotor (10) and pin
(11).
Unscrew the plug (12) and remove the compression
spring (13) with the adjusting piston (14).
ENGINE
3 - 47