APRILIA RSV mille 956X Service And Repair Manual page 214

RSV mille
Unscrew and remove the two M6x25 screws (14) and
the right injector support (15), together with the relevant
gasket (16), injector (17) and sealing ring (18).
NOTE
The injector's sealing ring (18) may be kept in-
serted in the slot on the throttle body.
Unscrew and remove the M8x1 nut (19) and remove
the spring washer (20), the pulley (21), the two bushes
(22) and torsion spring (23).
Slide the fulcrum pin (24), together with the lock washer
(25), out of the hole on the throttle cable support brack-
et and remove the two shaft sealing rings (26) with the
torsion spring (27) and cold-start lever (28).
FUEL SUPPLY SYSTEM
4 - 15