APRILIA RSV mille 956X Service And Repair Manual page 93

ENGINE
Disconnect the spark plug caps (15).
a
CAUTION
Use a degreasing detergent, brushes and rags to
clean the engines outer surfaces.
Avoid damaging rubber and plastic parts with corro-
sive or penetrating detergents and solvents.
Should the use of a steam cleaner prove necessary,
do not point the high-pressure jets of water, steam or
air at the following parts: wheel hubs, controls on the
right and left handlebars, brake pumps, instruments
and gauges, silencer openings, document compart-
ment, ignition switch/steering lock, electrical compo-
nents.
Clean the outside of the engine thoroughly.
Remove the exhaust pipes, see 3.2.1 (REMOVING
THE EXHAUST PIPES).
Disconnect the electric connector (20) from the elec-
trofan.
Disconnect the electric cables from the horn.
a
CAUTION
When refitting, make sure the electric connectors are
plugged in properly.
a
CAUTION
Mark the coupling and pipes so as to prevent them
being swapped over by mistake during refitting.
Remove the engine oil tank (16), see 7.1.49 (REMOV-
ING THE ENGINE OIL TANK) together with the engine
oil radiator (17), see 7.1.50 (REMOVING THE ENGINE
OIL RADIATOR), disconnecting the pipes connecting
them to the engine (18 - 19).
Remove the radiators (21 - 22) joined together, see 5.2
(REMOVING THE RADIATORS), complete with elec-
trofans, horn and mounts.
3 - 10
RSV mille