RSV mille
#//,).' %,%#42/&!.
6.9.1 WIRING DIAGRAM
NOTE
See 6.2 (ELECTRIC COMPONENTS LAYOUT)
for the positioning of the components.
Wiring diagram key
29) Secondary fuses (15A)
33) Cooling fan relay
39) Thermal switch
40) Cooling fans
A) To the battery / ignition switch
6.9.2 CHECKING THE ELECTROFAN OPERATION
NOTE
The following procedure refers to a single elec-
trofan, though it is applicable to both.
To check operation of electrofan (1):
Remove the left-hand side fairing, see 7.1.26 (REMOV-
ING THE SIDE FAIRINGS).
Disconnect the two electric terminals (2-3) from the
thermal switch (4) and connect them together.
Turn the ignition switch to position "
a
CAUTION
Then reassembling, make sure the electric terminals
(2-3) are connected properly.
If the electrofan does not work:
Turn the ignition switch to position "
Make sure the connector (5) is correctly inserted.
Rotate the fan manually, making sure the blades do not
touch the mount.
Check the recharging system, see 6.3 (CHECKING
THE RECHARGING SYSTEM) and the secondary fus-
es (15A).
Repeat the procedure for the other electrofan.
n
".
m
".
ELECTRICAL SYSTEM
6
- 25