Hdd Status Leds - Barco Freya User Manual

1 Power / Error LED
2 Ready LED
Status overview PWR/ERROR and READY LEDs:
PWR/ERROR
Off
Red
Blinking Green
Blinking Green Blinking Orange
Blinking Green
Blinking Green Blinking Yellow
Blinking Green
Green Blinking Green
Green
Green
Blinking Red
Green Blinking Orange
Orange

3.3 HDD status LEDs

HDD status LEDs

Image 3–3
4 HDD I/O LED
5 RAID LED
Status LEDs on ICMP-X
HDD I/O RAID
Off Off
Blinking green Off
Blinking green Slow blinking
red
Blinking green Fast blinking
red
Off Red
READY ICMP-X Status
Off Turned off
Off Board reset or FIPS error
Off Boot loader
Operating System start up
Orange Security Manager - Image Integrity tests
Security Manager - Self Test
Yellow Security Manager - FPGA self-test
Starting Applications
Green Applications started in normal mode
Orange Applications started in degraded mode
Off FIPS error
Update ongoing
Orange Update done
HDD Status
HDD idle / disk in RAID OK.
HDD I/O activity / disk in RAID OK.
HDD disks not (yet) initialized (not supported on ICMP with GEN1 storage
controller).
HDD I/O activity / RAID rebuilding.
HDD idle / Disk error. Consult the following troubleshooting table for
curative actions.
ICMP-X
R5910032 /00 Freya 37