Cropping (Active Area) - Barco Freya User Manual

7.7.3.1 Cropping (active area)

What is cropping
Realize "cropping" means define an active area.
The active area within a source frame equals the relevant movie information within the movie stream. E.g. :
1280 x 1024 movie can be mastered in a 1920 x 1080 stream. Only the 1280 x 1024 frame contains the
relevant movie information. In this case, the active area is 1280 x 1024.
The most frequently used active areas are predefined behind shortcuts (e.g. 2K Scope).
How to crop
1. While in screen file editor, click Cropping (reference 1).
7
Image 7–131
2. If you need a predefined active area, click on a shortcut at the right hand of the window (reference 2).
Width (reference 5) and Height (reference 6) are settled with predefined values.
For a dedicated active area, continue with the next steps.
3. Click on the slider of Width (reference 5) and Height (reference 6) and drag to set up the active area.
or
click on plus button or minus button of Width (reference 5) and Height (reference 6) to set up the active
area.
or
click in the input field of Width (reference 5) and Height (reference 6) , select the current value and enter a
new value with the keyboard to set up the active area.
4. Click on the slider of X-offset (reference 3) and Y-offset (reference 4) and drag to set the offset.
or
click on plus button or minus button of X-offset (reference 3) and Y-offset (reference 4) to set up the
offset.
or
1
Configuration - Projector
2
3
4
5
6
R5910032 /00 Freya 149