Table of Contents
Advertisement
Configuration - Media server automation
11.1 Devices
11.1.1 About devices
Location & access
Menu: Configuration > Media server automation > Devices
Level: Administrator, Service technician
Overview
Devices that could be used for automatic actions can be configured during adding a device. Multiple devices
of the same type can be added to the ICMP-X by using a different device name. This device name will be used
to identify the port.
The following devices are available:
•
JNIOR : Ethernet I/O controller Device. This device provides a full suit of solutions (additional GPIO) to
make digital cinema automation easier. It makes it possible to control e.g. the theater infrastructure such as
lights, sound, etc. .
•
TCP : all devices that use the TCP protocol. Transmission Control Protocol is an Ethernet connection to
send simple user messages.
•
UDP : all devices that use the UDP protocol. User Datagram Protocol is an Ethernet connection to send
user messages in quick way but without guaranty that the message is received.
When adding a device, the following must be configured before the device can be used:
•
Device name: a unique readable name of the device.
•
Hostname/IP: IP address of the device in the theater network.
•
Port: IP port number associated with the device.
•
Login: used by the ICMP-X, in combination with the password, to establish communication with the remote
device.
•
Password: used by the ICMP-X, in combination with the login, to establish communication with the remote
device.
Ports, logins and passwords must be retrieved from the unit manufacturer and are not provided by
Barco.
11.1.2 Add a new device
Location & access
Menu: Media server automation > Devices
Level : Administrator, Service technician
How to add
1.
While in Configuration > Media sever automation > Device, click on the Device menu (reference 1) located
on the top right of the list and select New (reference 2)
210
R5910032 /00
Freya
Advertisement
Table of Contents
