Changing Gpo Status Manually - Barco Freya User Manual

Configuration - Projector automation
Image 10–4 Example of the GPO Event editor for the event "Caution raised"
2. Select the desired GPO to allocate this event.:
or
Click None (reference 2, Image 10–4) if you do not want to allocate this event to any GPO.
GPO actions (reference 4) are disabled until a GPO is selected.
3. Select the desired GPO action you want to trigger on the GPO.
Click the radio button (reference 4) corresponding to action that you want to trigger on the GPO.
4. If the event was modified during the previous steps, an asterisk is displayed before the event name
(reference 5) and Save is now available (reference 6).
5. Click Save (reference 6) to save the changes made to the event.
6. Click Test (reference 7) allows testing the GPO like if the event was raised.

10.3 Changing GPO status manually

Location & access
Menu: Configuration > Projector automation> GPO Status
Level: Administrator, Service technician
Menu overview
This menu allows you to manage status of the GPOs (general purpose outputs) present inside the projector.
This can be done to test associated automation systems (e.g. curtains, theater lights, etc).
206 R5910032 /00 Freya