Setting The Internal Clock Of The Projector - Barco Freya User Manual

A maximum offset of 360 seconds (6 minutes) per calendar year can be used using this method.
Automatic clock adjustment (NTP server)
If you have access to a Network Time Protocol Server (NTP), it is recommended to synchronize the projector
to it. Using this method, the internal clock of the projector will be continuously synchronized with the NTP
server. Any deviation between the NTP server and the projector will be in the order of milliseconds.
NTP
Network Time Protocol

7.9.2 Setting the internal clock of the projector

Location & access
Menu: Configuration > Projector > Internal clock settings
Level: Administrator, Service technician
How to set the internal clock of the projector?
1. While in Configuration > Projector > Internal clock settings, set your local Time zone (reference 1). Click
on the drop down box and select the applicable time zone for your location (reference 2).
Image 7–167
2. Optionally, you can deactivate the Automatic Daylight Saving Time (DST) by deselecting the checkbox
next to it (reference 3). If deselected, you can select the corresponding value for your time zone by using
the associated drop box (reference 4).
Image 7–168
Note: Automatic Daylight Saving Time (DST) is by active by default. While you can disable this
feature to adjust it manually, this is not recommended. Only disable this feature if you live in a
time zone without an active DST, or if local legislation forces you to do so.
1
2
Configuration - Projector
R5910032 /00 Freya 173