Table of Contents
Advertisement
The connection with the slave is secularized now: Icon (reference 5) symbolizing the connection with the
slave is uncrossed.
or
if connection failed an error message is displayed. Click Ok then verify credentials and check projectors
certificates and their validity dates.
How to modify settings of a slave projector
1.
While in tab linked CLO in Configuration > System access > Multi projectors, click on Edit icon (reference
1) of the projector slave you want to exchange.
The window Add projector as slave is displayed.
Image 14–30
Note that the address of the projector currently edited is not displayed in the list of available projectors.
2.
Select an IP address (reference 2) in the list automatically proposed (List of available projectors in the
local network without the current selected ).
3.
Click Ok (reference 3) .
The previous projector is removed and the new slave projector is now displayed in the Slave Projectors
list.
How to delete slave projector
1.
While in tab linked CLO in Configuration > System access > Multi projectors, click on Delete icon
(reference 1) of the projector slave you want to remove.
7
1
2
3
Configuration - System access
R5910032 /00
Freya
281
Advertisement
Table of Contents
