Table of Contents
Advertisement
Configuration - System access
Image 14–25
2.
Enter the IP address (or Host name) of slave projector (reference 3),
or
Select an IP address in the list automatically proposed (List of available projectors in the local network).
3.
Select in the played frames drop down (reference 4) which image the slave will play: the right or the left
image, or the both in same time.
4.
Select a protocol of synchronisation for the BNC cable (the link that allows synchronisation between the
master and the slave) by clicking on the drop down list (reference 5).
5.
Click Ok (reference 6) .
New slave projector is now displayed in the Slave Projectors list.
How to modify settings of a slave projector
1.
While in tab linked ICMP in Configuration > System access > Multi projectors, click on Edit icon (reference
1) of the projector slave you want to remove.
Edit window of the slave projector is displayed (reference 2).
Image 14–26
278
R5910032 /00
Freya
1
2
3
4
5
6
1
2
3
4
5
6
Advertisement
Table of Contents
