General; Technical Documents To Read Prior To Servicing; Data Rating Plate - Thermador Pro Grand Next Generation PRD48JDSGC/02 Service Manual

Service Manual for the Thermador Pro Grand Next Generation, Dual Fuel Range with Steam Oven, Models: PRD48JDSGC/02, PRD48JDSGU/02
1

GENERAL

This manual contains information that is necessary for servicing the
following Thermador Pro Grand, Next Generation (PGNG) dual fuel
ranges with steam oven:
PRD48JDSGC/02
PRD48JDSGU/02
NOTE: Thermador Pro Grand Next Generation dual fuel ranges with
steam oven use natural gas (NG), however they can be converted for
use with Liquid Propane (LP) gas using the LP Conversion kit.
Due to the complexity and the risk of high-voltage electrical shock,
customers should not service their appliances.
The information provided in this document is intended for trained,
qualified personnel only. The proper function and the safety of the
appliance can be affected by an improper repair, and even serious
threats to life or physical condition may arise. BSH Home Appliances
Corporation is not liable for damages caused by improper repairs
performed by unauthorized parties. Local codes and standards apply
and must be observed.
For authorized servicers, additional assistance is available by
contacting our Technical Support Team at (800) 444-9091.

1.1 Technical Documents to Read Prior to Servicing

Before you start servicing, check QuickFinder for all documents and
information associated with this specific appliance and/or parts.
58300000163852_ARA_EN_C

1.2 Data Rating Plate

The data rating plate shows the model, serial, and FD number. It is
located at the right side panel (see Figure 1), and is pulled out by the
tab. The information on the data rating plate is required when calling
for technical or customer service.
The first two digits of the FD number indicate the year the appliance
was produced. To get the year, add 20 to the first two digits (for
example, an FD number beginning with 87 was produced in 2007; a
number that begins with 88 was produced in 2008). The last 2 digits of
the FD number indicate the month the product was produced (for
example, 06 indicates the appliance was produced in June).
Figure 1: Data Rating Plate
Page 5 of 123