Thermador Pro Grand Next Generation PRD48JDSGC/02 Service Manual page 66

Service Manual for the Thermador Pro Grand Next Generation, Dual Fuel Range with Steam Oven, Models: PRD48JDSGC/02, PRD48JDSGU/02
Figure 108: Rear Panel Shown Collapsed
6. Slide the warming drawer outward, and then reach inside the
cavity to remove and retain the grounding screw from the inner
roof of the cavity (see Figure 109).
NOTE: Be careful not to scratch the glass element with the
collapsed rear panel when reaching inside the cavity.
Figure 109: Grounding Screw (Shown Inside Cavity)
58300000163852_ARA_EN_C
7. Unplug the sensor wire connector at the back of the warming
drawer before removal of the warming drawer (harness shown in
Figure 108.)
8. Push the warming drawer back in, and then remove and retain the
two screws holding the slides (see Figure 110).
Figure 110: Screws Attached to Slides
1 Screws (2) holding the slides
9. Gently slide the warming drawer out from the cavity.
Page 67 of 123