Thermador Pro Grand Next Generation PRD48JDSGC/02 Service Manual page 32

Service Manual for the Thermador Pro Grand Next Generation, Dual Fuel Range with Steam Oven, Models: PRD48JDSGC/02, PRD48JDSGU/02
1. Follow all safety precautions and steps in Preparing the Range for
Servicing, page 25.
2. Complete steps for Accessing Components under the Maintop,
page 25.
3. Remove the backguard (see Backguard Removal and
Replacement, page 100).
Figure 33: Removing Screw from the Top, Front of Side Panel
1 Screw (1) on side panel, at the top, front
58300000163852_ARA_EN_C
4. Remove and retain the six screws that secure the side panel (see
Figure 32 on page 32, and Figure 33).
5. Use a rachet with 6-inch long (minimum) swivel head extension,
fitted with a 5/16 inch deep-well socket to remove and retain the
nut with lockwasher on the upper and lower screws (see Figure 34
and Figure 35, page 34).
NOTE: Removing the lower nut with lockwasher may require first
removing the simmer control board (see Simmer Control Board
Removal and Replacement, page 88).
-OR-
Alternatively, you can use a 6-inch long (minimum) flex extension,
fitted with a 5/16 inch deep-well socket to remove and retain the
nut with lockwasher from both the upper and lower screws (see
Figure 36, page 34).
6. Remove a side panel by lifting it up and outward; it detaches from
the tab that is on the control panel (see Figure 41, page 36).
Page 33 of 123