Thermador Pro Grand Next Generation PRD48JDSGC/02 Service Manual page 115

Service Manual for the Thermador Pro Grand Next Generation, Dual Fuel Range with Steam Oven, Models: PRD48JDSGC/02, PRD48JDSGU/02
8. If necessary, after broil reflector plate removal you can pull the
flue pipe out from the top of the range to remove it (Figure 209).
Figure 209: Broil Flue Pipe (Shown from Inside Oven Cavity)
9. To install an element onto a new broil reflector plate, first make
sure the plate is facing the correct direction before you bend the
tabs and install the element. The element should be installed
when the broil reflector plate's outer, encompassing rim is facing
upward (see Figure 210 and Figure 211).
Figure 210: Element Installed to Wrong Side of Reflector Plate
58300000163852_ARA_EN_C
Figure 211: Element Installed to Correct Side of Reflector Plate
1 Rim of broil reflector tray
10. Use a screwdriver and pliers to bend all seven tabs upward to a
90° angle before installing the element (see Figure 212).
Figure 212: Bending Tabs Upward on a New Broil Reflector Plate
Page 116 of 123