General; Applicable Models; Data Rating Plate; Wiring Diagram - Thermador Pro Grand PRD304EG Service Manual

Service Manual for Thermador Pro Grand Dual Fuel Ranges:
1

GENERAL

Thermador Pro Grand dual fuel ranges may include such features as
convection bake and convection broil, a 6-pass / 1630-watt electric
griddle, a gas grill, 6-pass bake and 8-pass broil elements for the
large oven, 6-pass bake and broil elements for the small oven, Star®
burners, and two ExtraLow® simmer burners. Compatible with natural
gas, the range is convertible to LP gas using the PLPKIT kit.

1.1 Applicable Models

This manual contains information that is necessary for servicing the
following Thermador Pro Grand dual fuel ranges:
PRD304EG
PRD364EDG
PRD364EDPG
PRD364ELG
PRD366EG
PRD366EPG
PRD484ECG
PRD484EEG
PRD486EDG
PRD486EDPG
PRD486ELG
■ Due to the complexity and the risk of high-voltage electrical shock,
customers should not service their appliances.
■ The information provided in this document is intended for trained,
qualified personnel only. The proper function and the safety of the
appliance can be affected by an improper repair, and even serious
threats to life or physical condition may arise. BSH Home
Appliances Corporation is not liable for damages caused by
improper repairs performed by unauthorized parties. Local codes
and standards apply and must be observed. Contact Technical
Support for further assistance at (800) 444-9091.
58300000157422_ARA_EN_A
PRD304EG, PRD364EDG, PRD364EDPG, PRD364ELG, PRD366EG, PRD366EPG, PRD484ECG, PRD484EEG, PRD486EDG, PRD486EDPG, PRD486ELG

1.2 Data Rating Plate

The data rating plate which shows the model, serial, and FD number
is located at the bottom of the range behind the kick panel, as shown
in Figure 1. Remove the kick panel to access it. The information on
the data rating plate is required when calling for technical or customer
service.
The first two digits of the FD number indicate the year the appliance
was produced. To get the year, add 20 to the first two digits (for
example, an FD number beginning with 87 was produced in 2007; a
number that begins with 88 was produced in 2008). The last 2 digits of
the FD number indicate the month the product was produced (for
example, 06 indicates the appliance was produced in June).

1.3 Wiring Diagram

The wiring diagram is located at the back side of the kick panel
(see Figure 1).
Figure 1: Data Rating Plate and Wiring Diagram Locations
1 Data rating plate (behind kick panel)
2 Wiring diagram (back side of kick panel)
Page 5 of 95