Thermador Pro Grand Next Generation PRD48JDSGC/02 Service Manual page 92

Service Manual for the Thermador Pro Grand Next Generation, Dual Fuel Range with Steam Oven, Models: PRD48JDSGC/02, PRD48JDSGU/02
9. Detach the spade wire connectors from the latch and the white
plastic piggyback wire connector on the door latch's microswitch
(see Figure 162 and Figure 163).
NOTE: It is always recommended to label and tag all wires, wire
connectors, and harnesses prior to disconnecting them so as to
correctly identify their connections/locations when reassembling.
Alternatively, you can photograph prior to disconnecting (for
example, with your mobile phone).
Figure 162: Door Latch
1 Plunger switch
2 Wire connectors on door latch
3 Microswitch
58300000163852_ARA_EN_C
10. Replace the door latch if needed.
NOTE: If replacing the plunger switch, it must be done before the
door latch is reinstalled (see Plunger Switch Removal and
Replacement, page 94).
Figure 163: Door Latch (Shown Removed from Cavity)
1 Spade connectors (2)
2 Piggyback wire connector
3 Door latch
Page 93 of 123