Thermador Pro Grand Next Generation PRD48JDSGC/02 Service Manual page 25

Service Manual for the Thermador Pro Grand Next Generation, Dual Fuel Range with Steam Oven, Models: PRD48JDSGC/02, PRD48JDSGU/02
4. Remove and retain the two T-30 screws securing each brass
burner base onto the pedestal (see Figure 16).
Figure 16: Burner Base
1 T-30 screws (2)
5. Slowly lift the burner base off of the pedestal (see Figure 17).
6. Press the locking tab on the igniter wire terminal, and pull gently to
detach from the igniter plug (see Figure 18).
58300000163852_ARA_EN_C
Figure 17: Lifting the Burner Base off the Pedestal
1 Electrode (igniter plug)
Figure 18: Igniter Wire Locking Tab
1 Tab to press in order to detach wire from electrode
Page 26 of 123