Thermador Pro Grand Next Generation PRD48JDSGC/02 Service Manual page 35

Service Manual for the Thermador Pro Grand Next Generation, Dual Fuel Range with Steam Oven, Models: PRD48JDSGC/02, PRD48JDSGU/02
8. Cover the door with protective matting, and then close the door to
provide a support for the control panel when it is removed (see
Figure 41). Make sure the door is very secure and does not move,
in order to support the control panel well when placed on the door.
-OR-
Alternatively, fold and place the protective matting over the top of
the range to use as a cushion if placing the control panel there
(see Figure 42, page 37). For this, you may need to detach some
of the wire connectors if they are not long enough.
Sharp Components – Use Gloves
Wear gloves when handling the control panel, as some components
are sharp.
9. Wearing gloves, carefully remove the control panel by pulling it up
to detach the lip from the front crossmember, and then by pulling it
in a forward direction (towards you). See Figure 40 and Figure 41.
Be aware that the wire harnesses are still connected.
58300000163852_ARA_EN_C
Figure 40: Removing the Control Panel
Figure 41: Protective Matting and Control Panel over Door
1 Tabs (2) – one each side of the control panel
2 Flange which attaches to front crossmember
Page 36 of 123