Thermador Pro Grand Next Generation PRD48JDSGC/02 Service Manual page 46

Service Manual for the Thermador Pro Grand Next Generation, Dual Fuel Range with Steam Oven, Models: PRD48JDSGC/02, PRD48JDSGU/02
15. At the LCD board, remove the sleeve from each of the five
standoffs, and then gently lift the LCD board off of the standoffs
(see Figure 65 and Figure 66).
16. Replace the LCD board if needed.
NOTE: All four dipswitch settings on the LCD board should be in
the OFF position (see Figure 66).
Figure 65: LCD Board (Back Side Shown)
1 Sleeves on standoffs (5)
2 LCD board
17. If the button guide was not already removed (per step 6 of this
procedure), you can detach the button guide by using a small
screwdriver to press lightly on the four black standoffs on the back
of the button board (see Figure 67).
58300000163852_ARA_EN_C
Figure 66: LCD Board (Front Side Shown with LCD)
1 Dipswitches (4)
Figure 67: Pressing Standoffs on Button Board to Detach Button Guide
Page 47 of 123