Thermador Pro Grand Next Generation PRD48JDSGC/02 Service Manual page 30

Service Manual for the Thermador Pro Grand Next Generation, Dual Fuel Range with Steam Oven, Models: PRD48JDSGC/02, PRD48JDSGU/02
7. If the element needs replacing, first remove and retain the two
screws securing the ends of the element onto the range (see
Figure 28).
8. Then snap the element out of the fixed brackets on the element
tray (see Figure 28).
9. Remove the two screws from the element tray that hold the
insulation support bracket (see Figure 28).
Figure 28: Fixed Element Brackets, and Screws to Remove
1 Screws (2) holding insulation support bracket
2 Fixed brackets (5)
3 Screws (2) holding element ends onto range
58300000163852_ARA_EN_C
10. Detach and remove the insulation support bracket from under the
element tray (see Figure 29).
Figure 29: Detaching Insulation Support Bracket
1 Insulation support bracket
11. While lifting up the element tray slightly, carefully push the bulb
through the circular receptacle in the element tray (see
Figure 27, page 30).
Fiberglass
Wear gloves when handling fiberglass insulation
12. While removing the insulation (see Figure 30, page 32), be careful
not to pull on the thermostat bulb.
13. Remove the insulation support bracket (see Figure 29).
14. Before removing the insulation, carefully pull out the thermostat
bulb from underneath the insulation.
Page 31 of 123