Nortel Meridian 1 Manual page 392

Page 354 of 500
553-3001-210 Standard 14.00 June 1999
Configuring remote peripheral equipment
NT8D22 System Monitor
At the remote location, set all system monitors as slaves, as shown in the
following Tables 108 and 109.
Table 108
NT8D22 System Monitor switch settings for slaves
Switch 1
SW1 off
SW2 off
SW3 off
Set to on for DC systems; set to off for AC systems.
*
Set to on to enable PFTU (if equipped) during over-temperature
**
condition.
Set to off to disable PFTU during over-temperature condition.
2 3 4
off * **
off To set positions 3-8, see Table 109
off off off
5 6 7
off off off
8
off