Nortel Meridian 1 Manual page 186

System installation procedures

Hide thumbs Also See for Meridian 1:

Table of Contents

Page 148 of 500

NT6D60 Core Module (rear)—preinstalled backplane connections

Connector for

NT7D90 cable

553-3001-210 Standard 14.00 June 1999

Cabling common equipment

18 17 16 15 14 13 12 11 10 9 8

Connector for

NT7D89 cable

On the faceplates of the 3PE cards in the Core Modules

connect an NT8D80BZ cable from J4 in Core 0 to J4 in Core 1

connect another NT8D80BZ cable from J3 in Core 0 to J3 in

In the rear of the Core Modules, connect the cables between Core 0 and

Core 1 (see Figure 75):

Note 1: The following cables may already be connected in one of the

modules. If so, leave them connected and attach the loose end.

Note 2: The cables must be routed as perpendicular as possible to

nearby power cables.

Connector for

NTND14 cables

Chapters

Table of Contents