Nortel Meridian 1 Manual page 134

Page 96 of 500 Configuring the system monitor
Figure 53
Options 71, 81, and 81C—cabling for master system monitor to slave unit 1 and SDI port
To SDI port
NT8D46AD
Backplane
CPU 0
power supply assembly
553-3001-210 Standard 14.00 June 1999
For options 71, 81, and 81C
• Connect the master system monitor to slave unit 1 with an
NT8D46AS cable.
• Connect the narrow ribbon on an NT8D46AD cable from connector
J2 in the module with CPU 0 to the assigned port on the SDI card
(see Figure 53).
To next module
cable
To system monitor/
in the pedestal
J2
J1
Backplane
CPU 1
NT8D46AS cable
To next module
NT8D46AA
cable
To system monitor/
power supply assembly
in the pedestal
553-3112
J2
J1
553-3112