Touchscreen Consoles (P62, P80, And P82); Pvs Display - Precor Experience 700 Series Service Manual

Touchscreen consoles (P62, P80, and P82)

Touchscreen consoles use an
Self-power machines: the AC/DC adapter input power cord is plugged into the facility
l
wall outlet. Up to ten consoles can be connected to the same 20 amp individual
branch circuit. Only touchscreen consoles can share the same individual branch cir-
cuit, no other devices can be connected to this circuit.
Powered machines: the AC/DC adapter is powered by the machines internal power
l
supply which is hardwired to the machine input power circuit.
AC/DC adapter specification:
AC/DC Adaptor
input voltage
output power rating

PVS Display

PVS displays use an AC/DC power adapter to power the display.
On treadmills, the PVS display can be plugged into the same individual branch circuit
l
outlet as the treadmill.
On self-powered equipment, up to 10 PVS displays can be connected to the same
l
20A branch circuit. No other devices except PVS displays can be connected to this cir-
cuit.
PVS display specification:
PVS Display
input power
AC/DC adapter specification:
AC/DC Adaptor
input voltage
output power rating
1
Direct Current: electrical current that only flows in one direction.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
1
AC/DC power adapter to supply the console input power.
Specification
100v-240v
60W/12Vdc/5A
Specification
43 W max
Specification
100v-240v
60W/12Vdc/5A
2 General Information
Console & PVS Display Power Requirements
Page 20