Precor Experience 700 Series Service Manual page 73

5. Verify that the measured Drive Belt tension is within the belt condition New or Used
tension specification:
a. If the tension is not within the belt tension specification; continue procedure to
adjust the tension to specification.
b. If the belt tension is within the belt tension specification; verify the machine
operation and return to service, see
Belt Condition
New
Used
6. Place the belt tension gauge onto the Drive Belt mid distance between the drive motor
and drive roller pulleys.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Drive Belt Tension and Alignment Adjustment
"Operation Verification" on
Drive Belt Tension
100-120 lbs (45-54 kgs)
80-90 lbs (36-41 kgs)
5 Adjustment Procedures
page 24.
Page 63