Precor Experience 700 Series Service Manual page 160

Hide thumbs Also See for Experience 700 Series:
Table of Contents

Advertisement

Removal Instructions
1. Switch the power OFF and unplug the power cord.
2. Remove the hood cover, see
3. Use a 5/16" hex key socket and ratchet to relax the running belt tension by alternately
loosening the left and right belt tension adjustment bolts in 1/4 turn increments. Use
this method to evenly remove the left and right belt tension. Do not use power tools
which can make it difficult to control the left/right 1/4 turn incremental bolt loosening
acquirement. Uneven belt tension removal can cause damage to the running belt or
tension adjustment hardware.
(missing or bad snippet)
4. Use a 1/2" socket with 6" extension to loosen the four Drive Motor mount bolts
enough so that the motor can slide forward and rearward in the mounting tray.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Covers and Panels
Replacement.
6 Replacement Procedures
Drive Belt Replacement
Page 150

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Experience trm700-16Experience trm700-18

Table of Contents