Precor Experience 700 Series Service Manual page 52

INFORMATION DISPLAY
(1)
BELT RATING
MAINT COUNTER
Belt Maintenance
U-BOOT SW
U-BASE SW or
MAIN CONSOLE SW*
1
Treadmill
2
Alternating Current: electric current which periodically reverses direction between positive
and negative polarity.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
that PCA is replaced the hours of use would start again
from "0".
(Treadmills with the ASL feature only)
Displays the belt rating from 10 (best) to 0 (worst).
Belt rating ≤ 1 replace the running belt
A belt rating of 0 or 1 will cause a blue pulsing ASL light
indicating that there is a problem with the running belt/-
deck and requires servicing or replacement.
Important: Reset the Belt Rating after replacing with a
new running belt and deck ( hold down QuickStart).
Provides machine next maintenance due remaining
mileage or hours. Perform preventative maintenance
when the maintenance counter reaches 0.
(1)
Press/Hold the PAUSE/RESET key to reset the counter
(treadmills reset to 1000 miles, ellipticals reset to 250
Hrs).
1
(TRM
Information used to help determine the condition of the
running belt and when the belt needs to be replaced.
Belt Maintenance provides the averaged input current
values at 6, 8, and 10 mph across 50 workouts. Meas-
urements are only taken when AutoStop is ON and the
incline is set to 0%.
BELT HOURS: belt usage hours
AV-AMP-6MPH: averaged current a 6 mph
(2)
AV-AMP-8MPH: averaged current a 8 mph
AV-AMP-10MPH: averaged current a 10 mph
Belt condition/disposition based on typical
rent values:
Normal: 8 -12 A (120Vac) / 4 - 6 A (240Vac)
Worn: ≥ 16-18 A (120Vac) / ≥ 8-9 A (240Vac)
Replace: ≥ 19 A (120Vac) / ≥ 9.5 A (240Vac)
Max Amps: 20 A (120Vac) / 10A (240Vac)
The console upper boot software version information.
The console upper base software version information.
*P31 console only.
LED Console Standard Service Menus
DESCRIPTION
600 only)
4 Standard Service Menus
2
AC input cur-
Page 42