Precor Experience 700 Series Service Manual page 187

3. Tension an align the Drive Belt to specification, see
ment Adjustment" on
Belt operation will be verified later in the procedure.
4. Tension the Running Belt to specification and verify tracking, see
sion and Tracking Adjustment" on
5. Do a manual workout and verify the drive belt alignment and operation. Make sure
that the belt remains centered and that there are no unusual noises or squeaking
sounds.
6. Reinstall the left & right Landing Trim covers, see
ment" on page 91
7. Verify Operation (see
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
page 58. DO NOT switch the power ON at this step, the Drive
page 67.
and the hood cover, see
"Operation Verification" on
6 Replacement Procedures
"Drive Belt Tension and Align-
"Trim Landing Covers Replace-
."Hood Cover Replacement" on page 88
page 24) and return to service.
Drive Roller Replacement
"Running Belt Ten-
Page 177