Precor Experience 700 Series Service Manual page 292

5. After one minute, stop the treadmill by pressing the STOP button.
6. When the belt has fully stopped moving, remove the STOP key tether, exit the tread-
mill, and turn the power switch to OFF.
7. Grasp both sides of the towel and run it up and down the length of the belt several
times to clean the top of the deck.
8. Remove the towel from beneath the belt.
9. Turn the power switch to ON.
10. Verify operation and return to service.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
8 Preventative Maintenance
Running Belt and Deck Cleaning Procedure
Page 282