Precor Experience 700 Series Service Manual page 58

Hide thumbs Also See for Experience 700 Series:
Table of Contents

Advertisement

MAINTENANCE
(1)
MENU
Recommended
(1)
Action menu
» Operating Condi-
(1)
tion
(1)
» Belt Rating
» Next Maintenance
(1)
Due
Active Status Light
(1)
(ASL menu)
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
menu: Maintenance > Recommended Action
Range: None, Inspect
None: No maintenance required.
l
Inspect: Maintenance action required.
l
Used to report that there is a maintenance issue that requires
attention; it could indicate routine maintenance is due or that a
machine failure (error code) has occurred that required atten-
tion.
menu: Maintenance > Operating Condition
Range: Normal, Inspect
Normal: No maintenance required.
l
Inspect: There is a routine maintenance issue or failure
l
condition (error code) that requires immediate attention.
.Important: Reset the ASL light state and Motor Controller
(MC) status light after repairs a completed.
(Treadmills only, not supported on TRM600)
menu: Maintenance > Belt Rating
Range: 10 - 0 (10 - New condition, ≤ 1 - Replace running belt)
(ASL equipped products only)
A belt rating of 0 or 1 will cause a blue pulsing ASL light indic-
ating that there is a problem with the running belt/deck and
requires servicing or replacement.
Important: Reset the Belt Rating after replacing with a new run-
ning belt and deck (select Replace).
menu: Maintenance > Next Maintenance Due
Provides machine next maintenance due remaining mileage or
hours. Perform preventative maintenance when the main-
tenance counter reaches 0.
Important: Reset the maintenance interval after completing
routine maintenance service, (select Reset). Treadmills reset to
1000 miles, ellipticals reset to 250 Hrs.
menu: Maintenance > Active Status Light
Indicates the machine operating and maintenance status.
Blue Solid: Normal operation Indicates that the ASL has not
detected any logged error codes.
Blue Pulsing: Preventative maintenance reminder.
      • Treadmills: A belt rating of 0 or 1 will cause a blue pulsing
ASL light indicating that there is a problem with the running belt/-
deck and is in need of servicing or replacement.
4 Standard Service Menus
Touchscreen Console Standard Service Menus
DESCRIPTION
Page 48

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Experience trm700-16Experience trm700-18

Table of Contents