Precor Experience 700 Series Service Manual page 191

fastener(s) for installation.
7. Lift the roller from the frame brackets and remove the roller from the inside of the run-
ning belt. The roller is heavy, so be careful to not scratch the deck surface or inside
belt surface while removing the roller.
CAUTION: Make sure the Take-up roller does not drag across the deck surface
while removing causing damage to the deck surface.
Installation
Select the installation procedure for your particular configuration.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
6 Replacement Procedures
Take-up Roller Replacement
Page 181