System Settings Menu - Precor Experience 700 Series Service Manual

MAINTENANCE
(1)
MENU
» AS light Bright-
(1)
ness
» Maintenance
(1)
Reminder
(1) Not included on elliptical or treadmill products that do not have the maintenance and
ASL features. Not included on the EFX600 series, the TRM600 series, or the TRM800-10
(TRM10/GEN06) series products.

System Settings menu

menu: Service menu (51765761) > Settings > System Settings.
Provides settings to configure the console and machine. Also includes the service dia-
gnostic tests.
SYSTEM SETTINGS
MENU
System Tests menu
Connectivity menu
» Network Type
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
• ALL: The maintenance counter starts at 1000 hours count-
ing down to active use hours to 0 indicating preventative main-
tenance is due.
Yellow Solid: Indicates an error has occurred, was self-cor-
rected and the machine can be used. The fault can be cleared.
Yellow Pulsing There is a current non-recoverable fault con-
dition, there is a loss of a major function and the machine id out-
of-service. Machine service is required.
menu: Maintenance > AS Light Brightness
Range: Low, Medium, High
Set the ASL brightness level.
menu: Maintenance > Maintenance Reminder
Range: OFF, ON (default)
Switch the maintenance reminder function ON or OFF.
menu: System Settings > System Tests
Machine diagnostics tests to verify system hardware oper-
ation, see "System Tests menu" on
menu: System Settings >Connectivity
Connectivity includes Internet network and Preva
setup and configuration.
menu: System Settings > Connectivity > Network Type
Settings: Wired, Wi-Fi
Default: Wired
To connect to a network:
1. Select Network Type > Wired (or Wi-Fi) > Go.
4 Standard Service Menus
Touchscreen Console Standard Service Menus
DESCRIPTION
DESCRIPTION
page 54.
®
Server
Page 49