Table of Contents
Advertisement
RELATED DOCUMENTATION
Rack-Mount Installation Overview | 69
Front-and-Rear-Mounting the JSA Appliance Flush to a Rack | 86
Mid-Mounting the JSA Appliance in a Two-Post Rack | 92
Required Tools and Parts for Installing the JSA Appliance | 69
Front-and-Rear-Mounting the JSA7500 in a 4-Post Sliding Rail Rack
This option is used for the chassis that can easily pulled out from the rack when mounted on the rack-
mount system. The JSA7500 appliance is mounted using this option because of the fan door available
on the top of the appliance.
NOTE: The front-to-back rail spacing must be at least 48.3 cm (19-in.) from the outside face of
the front rail to the outside face of the back rail.
To mount JSA7500 using this option:
1. Insert four rack-mount screws on each side of the appliance to secure the mounting brackets to the
sides of the chassis as shown in
Figure 10: Securing Mounting Brackets
Figure 10 on page
88.
88
Advertisement
Table of Contents
